From the course: PLC Simulation Software: Factory I/O with Connected Component Workbench
Unlock the full course today
Join today to access over 24,700 courses taught by industry experts.
Step 1: Program fill and discharge pushbuttons - Ladder Logic Tutorial
From the course: PLC Simulation Software: Factory I/O with Connected Component Workbench
Step 1: Program fill and discharge pushbuttons
- [Instructor] Now for this chapter and for the next one, I'm going to change the theme in Connected Components Workbench software to Logix, making the software similar to Allen Bradley Autologic's 5000. The software still behaves the same but I thought I would give you the opportunity to try and see both themes. So now first, I'm going to go to Program1 and double click. Then I'm going to add an instruction for the fill push button. So I'm going to grab an XIC instruction and add it to the rung. Then go to the dropdown menu here and then select Micro850. And then scroll down all the way until you find the fill push button. So I'm going to double click here. Now, this will activate the filling valve and the green LED. So I'm going to grab an output instruction, and then go to Micro850. And look for the fill valve. It's output zero, so I'm going to select it and hit OK. Then I'm going to add a branch here.…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Filling a water tank project3m 14s
-
(Locked)
Step 1: Program fill and discharge pushbuttons3m 16s
-
(Locked)
Step 2: Adding timer (TON) in CCW software5m 28s
-
(Locked)
Step 3, part 1: Showing time on display in Factory I/O3m 34s
-
(Locked)
Project demo 11m 26s
-
(Locked)
Step 3, part 2: Showing time on display in Factory I/O9m 35s
-
(Locked)
Final project demo1m 51s
-
(Locked)
-
-
-