How-to clean your foam pad on-the-fly

[Mike Phillips]

How-to clean your foam pad on-the-fly


When using a dual action polisher to remove below surface defects with any type of abrasive product youre going to have two things building up on the face of the foam pad that you need to clean off.

• Spent residue - From the product youre using.
• Paint - Small particles of paint that are coming off the car as you abrade the surface

If youre working on a clear coat finish then keep in mind you wont see the paint residue building-up on the pad because the clear coat paint is clear.

Make sense?


If youre working on a clearcoat finish, all you`re going to see is the color of the product that youre using. For example if youre using a white colored polish youll see white residue building-up on the pad.

Now if youre working on as single stage paint then youll see the color of the paint on the car on the face of your foam pad,. For example if youre working on a single stage yellow paint system then youll see yellow paint on the face of your foam pad.

The important thing to understand is that as you work on the car with your polisher youre going to be removing a little paint and theres going to be used-up product and paint building-up on the face of the foam pad. It`s important to clean this gunk off your pad often.


So the question is, how to you clean this gunk off the pad?


The answer is theres a number of ways to clean your foam pad, the three most common are,

• Pad Washer
• Nylon Brush or Pad Cleaning Brush
• Terry Cloth Towel

Out of the 3 options listed above, cleaning your pad on the fly is probably the most popular because its fast, and most people have a terry cloth towel in the linen closet that they can use to clean the pad.

The best way to clean a pad is with a pad washer but before you can use a pad washer you must first own one. Pad washers are worth their weight in gold if you buff cars out with any kind of regularity. If however youre just buffing out your own personal cars, then chances are you dont own a pad washer but chances are very good you do own a terry cloth towel or two that you can use to clean your pads on the fly.

Brushes work good if youre using a rotary buffer but the only way you can use one with DA Polisher is to turn the polisher off, hold the polisher and pad in such a way that the pad wont spin and then rub the brush over the face of the pad to scrape off the residue.

While this works, it means turning the polisher off, (now you`re not buffing out the car, remember the time issue?) and grabbing your brush and then brushing the pad. Nothing wrong with this but when you consider how long it already takes to do the cleaning step, (about 4-6 hours for an average size car and thats if your good at this and if you work fast and dont take any breaks. So stopping the polisher and using a brush to clean the pad works but its not as fast or effective as using a terry cloth towel.

The whole idea and success behind the cleaning your pad on the fly technique is in that it allows you to clean your pad quickly, (thats the on the fly part), and then quickly get back to work.

Again, buffing out an entire car using a dual action polisher from start to finish is an all day job. There is no time for lollygagging. If you lollygag or take long breaks, you either wont get the job done in one day or youll sacrifice doing a quality job during the cleaning step in order to get to the waxing step so you can put the car back into service.



So lets take a look at how to clean your pad on the fly

Cleaning your pad on the fly is where you take a terry cloth towel, usually a medium size hand towel works best, you fold it in two and then simply hold the towel against the face of the pad and then turn the polisher on and use your hand thats holding the towel to push the towel into the foam. This will act to draw any excess liquid out of the foam and any excess residue off of the face of the pad.

This is me using the "Clean your Pad on the Fly Technique" to clean my pad on the fly as we removed the oxidation off an extremely neglected Dodge Neon.













This technique really only works well with the Porter Cable style DA Polishers.

There`s a modified version of this that works with rotary buffers...



Question: Why use terry cloth instead of microfiber?

Answer: Great question!

100% cotton terry cloth is very good at absorbing liquid, so when you push the terry cloth into the foam the liquid in the foam will transfer into the terry cloth fibers through capillary action where the cotton fibers will more or less hold or trap the liquid inside of themselves.

Theres more to it than that however, the nap of terry cloth, that is the little cotton loops, will help to slice into the caked and gummy reside which will loosen its hold so the residue will transfer to the towel as well as some will fall to the ground.

Compared to most microfiber polishing cloths with a nap, not the type that has flat woven surface, the terry cloth nap, (the nap is the the little tiny loops of cotton fiber), is more stout and its this extra stoutness that enables a large, nap terry cloth towel to work better to break-up the residue on the pad.

So its both the absorbency of the cotton fibers plus the larger size of the cotton nap that together make a terry cloth towel better for cleaning your pad on the fly.

Does that make sense?

The nap of 100% Cotton Terry Cloth Toweling



Conversely, isnt one of the reasons microfiber polishing cloths are so popular for wiping paint is because the fibers are microscopic in size and thus are more gentle to paint than larger cotton fibers? (The answer is yes)

You can use what you like and make up your own mind. Besides the case Ive made above for using terry cloth another reason is to save your microfibers for where they excel best and thats wiping residues off polished paint.

Some might also make the case that 100% cotton is better at absorbing while microfiber materials are better at adsorbing but thats probably getting just a little too deep for what is actually a very simple method of cleaning your foam pads while buffing out a car.

Try both the next time youre working on a car and come to your own conclusion but for me Ill use terry cloth towels for removing residues off my pads and Ill save my microfibers for carefully cleaning residues off paint.


Question: What about pad cleaning brushes?

Answer: I touched briefly on this above, but let`s drill down a little deeper. Pad cleaning brushes or even a nylon toothbrush work great for cleaning residue off the face of a foam pad when the foam pad is on a rotary buffer but they don`t work well at all when the pad is on a dual action polisher.

About the best you can hope for is to clean the very center of the pad when the tool is turned on but as you draw the bristles of the brush towards the outside of the pad the increased pressure over a small area, (the bristles of the brush pushing down on the foam), is enough pressure to engage the clutch in the tool and stop the pad from rotating.

The brush only cleans the pad if the pad is rotating. Thus brushes don`t work well for cleaning pads on dual action polisher when you`re trying to clean the pad while the polisher is turned on. Give it a try sometime and you`ll see exactly what I mean.

For years when someone asks about the cheapie rotary buffers you can buy at Harbor Freight for buffing out paint, I would always mention that if nothing else, they make a great pad cleaner. That is take your dirty pads and one at a time place them on the backing plate of the rotary buffer and then use the rotary buffer to clean your pads. Rotary Buffers are direct drive tools and have a lot of power and a little brush held against the face of the pad isn`t enough to slow the tool down so they work great for cleaning pads as well as removing a lot of paint quickly if you`re using a RB to buff-out paint.




The cleaning your pad on the fly technique works well for all the popular dual action polishers on the market including,

• Porter Cable 7424XP
• Porter Cable 7424
• Porter Cable 7336
• Ultimate Detailing Machine The first generation was Autopias design. The second generation is a re-badged Porter Cable 7424
• Meguiars G100a Re-badged Porter Cable 7424, came with a lifetime warranty
• Meguiar`s G100 Re-badged Porter Cable 7424, came with a 1 year warranty.
• Meguiars G110 Meguiars design
• Meguiars G220 Meguiars design 220 Volts
• Griots Garage Professional Random Orbital Polisher Griots design
• Shurhold DA Polisher
• DAS-6 PRO Dual Action Polisher

Other options include,

The Grit Guard Universal Pad Washer
Foam Pad Conditioning Brush

[dddetail]

Really good write-up, I just ran into this problem of not having the time to clean my pads correctly yesterday, so I needed your "on the fly" technique. I will try it next time, Thanks

[deathtoblackcar]

other way to clean a foam pad is simply take your pressure washer to it then put it on your buffer and crank the speed to 3000 rpm and let it run tell dry.