\r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n
\n
\nCQuartz by CarPro is an anti-static, hydrophobic nano coating that shines and protects your vehicle like nothing else! CQuartz works on the molecular level to transform the surface. Once treated with CQuartz, your vehicle will repel water and environmental contaminants, and it will maintain a clear, reflective, diamond hard shine. One application can last two years!
\n
\n
\nLets face it, your car is an investment and honestly, some of us just dont have the time to wash and protect our investment as often as wed like.
\n
\nThats where CQuartz comes in. CQuartz Ceramic Quartz Paint Protection creates a super durable protective coating that will reduce that required regular maintenance for up to two years. Your vehicle will stay cleaner longer; will not require frequent polishing, and no additional layers of paint protection!
\n
\n
\n
\n
\n
\n[ame=http://www.youtube.com/watch?v=dxM-p5cnXx8]YouTube - c.quartz user guide 1.wmv[/ame]
\n
\n
\nCarPro CQuartz Innovative Nano Coats\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329156] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�03:44 PM\r\n \r\n \r\n
\r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Wax Waster\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Anyone notice a straight scratch just right of the light?\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329159] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�04:11 PM\r\n \r\n \r\n
\r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Ronkh\r\n
\r\n
\r\n
Anyone notice a straight scratch just right of the light?
\r\n \r\n
\r\n
\r\n
\nCQuartz is certainly scratch resistant, but not completely scratch proof.
\n
\nIMO, It looks to me that it may be tape residue from previous filming.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329169] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�08:37 PM\r\n \r\n \r\n
\r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Long Time Member\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Ronkh\r\n
\r\n
\r\n
Anyone notice a straight scratch just right of the light?
\r\n \r\n
\r\n
\r\n
Yeah, I wondered the same thing but I`ll be the first to say I can get messed up looking at a finish under certain lighting conditions.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
A society willing to trade liberty for temporary security deserves neither and will lose both
\r\nΜΟΛΩΝ ΛΑΒΕ
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329157] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�03:45 PM\r\n \r\n \r\n
\r\n \r\n #5\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n loves rubbing paint\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n These new sealant products that are coming to market look amazing. I need to get this on my wifes car.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
Fergy-
\r\n
\r\nYour only as good as your last detail
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329162] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�06:24 PM\r\n \r\n \r\n
\r\n \r\n #6\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Auto Detail & Restoration\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Can CQuartz be applied directly after Menzerna po85rd? Or should 50/50 Iso wipe down be recommended?\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329177] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-15-2011,�08:00 AM\r\n \r\n \r\n
\r\n \r\n #7\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Concours.John\r\n
\r\n
\r\n
Can CQuartz be applied directly after Menzerna po85rd? Or should 50/50 Iso wipe down be recommended?
\r\n \r\n
\r\n
\r\n
\nDefinitely. The surface should be free of any polishing oils before applying. This will ensure that the coating will cure properly.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329239] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-16-2011,�11:59 AM\r\n \r\n \r\n
\r\n \r\n #8\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Hi All ,
\nim Avi from CarPro, ill try to help with questions here about carpro line products.
\n\r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Ronkh\r\n
\r\n
\r\n
Anyone notice a straight scratch just right of the light?
\r\n \r\n
\r\n
\r\n
this video was only to show how it should be applied, this is salvage panel, wasnt fully polished, thats why you see that scratch.
\n
\n
\n\r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Concours.John\r\n
\r\n
\r\n
Can CQuartz be applied directly after Menzerna po85rd? Or should 50/50 Iso wipe down be recommended?
\r\n \r\n
\r\n
\r\n
must be fully remove any oil or polish residue,
\nIPA with water 50/50 is not enough, we found ipa only "lifting" the oily residue from surface , not dissolving them, so while wiping with MF some of these return back to surface
\nthats why we suggest 90% ipa +10% dish wash soap, or even our ironx soap gel , this will dissolve any left oils from surface.. notice that after this procedure surface must rinsed well with water or power washed, if not , Cquartz wont bond well enough to surface.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329515] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-20-2011,�09:16 PM\r\n \r\n \r\n
\r\n \r\n #9\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Avi@CarPro\r\n
\r\n
\r\n
Hi All ,
\r\nim Avi from CarPro, ill try to help with questions here about carpro line products.
\r\nthis video was only to show how it should be applied, this is salvage panel, wasnt fully polished, thats why you see that scratch.
\r\n
\r\n
\r\n
\r\nmust be fully remove any oil or polish residue,
\r\nIPA with water 50/50 is not enough, we found ipa only "lifting" the oily residue from surface , not dissolving them, so while wiping with MF some of these return back to surface
\r\nthats why we suggest 90% ipa +10% dish wash soap, or even our ironx soap gel , this will dissolve any left oils from surface.. notice that after this procedure surface must rinsed well with water or power washed, if not , Cquartz wont bond well enough to surface.
\r\n \r\n
\r\n
\r\n
So I fill up a bottle with 90% IPA and then fill the rest of it up with purely dish soap.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329549] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-21-2011,�01:52 PM\r\n \r\n \r\n
\r\n \r\n #10\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Correct. , and rinse very well after , to remove all the soap residues from surface.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329164] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-14-2011,�06:47 PM\r\n \r\n \r\n
\r\n \r\n #11\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Super Moderator\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Impressive \r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329592] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-22-2011,�11:25 AM\r\n \r\n \r\n
\r\n \r\n #12\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Ummm.... Ya.....\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Thanks for the Vid John & Avi. I should have some CQuartz on the way to do my wife car. This along with great information provided by Richy & Corey will really help to make sure I get it right.
\n
\nQuestion: Avi, I have read and assume that the 30ml is enough to do a standard mid sized car all over. (Paint, Wheels, Glass, Trim) If this is the case is one coat sufficient, or should I buy another 30ml to do a second coat?\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329598] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-22-2011,�01:15 PM\r\n \r\n \r\n
\r\n \r\n #13\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
TroyScherer\r\n
\r\n
\r\n
Thanks for the Vid John & Avi. I should have some CQuartz on the way to do my wife car. This along with great information provided by Richy & Corey will really help to make sure I get it right.
\n
\nQuestion: Avi, I have read and assume that the 30ml is enough to do a standard mid sized car all over. (Paint, Wheels, Glass, Trim) If this is the case is one coat sufficient, or should I buy another 30ml to do a second coat?
\r\n \r\n
\r\n
\r\n
Hi
\n30ml will be enough , do first the car body, only if you have left you can do the rest
\n1 layer is enough, make sure to prepare the car well.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329723] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-24-2011,�07:48 PM\r\n \r\n \r\n
\r\n \r\n #14\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n Auto Detail & Restoration\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Does CQuartz have a measurable layer of protection, i.e.. electronic paint gauge?
\nI could see this if so, a great way to market to clients.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329735] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-25-2011,�07:35 AM\r\n \r\n \r\n
\r\n \r\n #15\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n There is full and very long thread done by a student in Poland :
\n
\nLaboratory Testing of Cquartz by Milosz - Detailing World
\nyou can see there pics and measures,
\ncquartz thickness is between 0.5 ~1.5 microns,
\nthe thickness basically dont mean anything, its the property of the coat which matters.\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
pd[329800] = '\r\n
\r\n\r\n\r\n \r\n
\r\n \r\n 04-26-2011,�07:04 AM\r\n \r\n \r\n
\r\n \r\n #16\r\n \r\n \r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n \r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Re: CQuartz Video Demonstration!\r\n
\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n
Originally Posted by
Avi@CarPro\r\n
\r\n
\r\n
There is full and very long thread done by a student in Poland :
\n
\n
Laboratory Testing of Cquartz by Milosz - Detailing World\nyou can see there pics and measures,
\ncquartz thickness is between 0.5 ~1.5 microns,
\nthe thickness basically dont mean anything, its the property of the coat which matters.
\r\n \r\n
\r\n
\r\n
This is one product that is on my wish list, been spreading the word to all my customers and have gotten allot of interest ( If this Kentucky weather would stop Raining) I plan to purchase several orders for this....cant wait....haven`t been this jazzed up over a product since Menzerna Power Lock\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n \r\n
\r\n\r\n';
// next/previous post info
pn[329153] = "329800,329156";
pn[0] = ",329153";
pn[329156] = "329153,329159";
pn[329159] = "329156,329169";
pn[329169] = "329159,329157";
pn[329157] = "329169,329162";
pn[329162] = "329157,329177";
pn[329177] = "329162,329239";
pn[329239] = "329177,329515";
pn[329515] = "329239,329549";
pn[329549] = "329515,329164";
pn[329164] = "329549,329592";
pn[329592] = "329164,329598";
pn[329598] = "329592,329723";
pn[329723] = "329598,329735";
pn[329735] = "329723,329800";
pn[329800] = "329735,329153";
// cached usernames
pu[0] = guestphrase;
pu[24120] = "
[email protected]";
pu[11132] = "Ronkh";
pu[14221] = "MrCLRider";
pu[23230] = "Concours.John";
pu[1262] = "Pats300zx";
pu[969] = "GearHead_1";
pu[24305] = "Avi@CarPro";
pu[21735] = "Superdutytd";
pu[22867] = "TroyScherer";
pu[22283] = "wendell jarvis";
// -->
-
04-26-2011,�07:04 AM
#16
Re: CQuartz Video Demonstration!
Originally Posted by
Avi@CarPro
There is full and very long thread done by a student in Poland :
Laboratory Testing of Cquartz by Milosz - Detailing World
you can see there pics and measures,
cquartz thickness is between 0.5 ~1.5 microns,
the thickness basically dont mean anything, its the property of the coat which matters.
This is one product that is on my wish list, been spreading the word to all my customers and have gotten allot of interest ( If this Kentucky weather would stop Raining) I plan to purchase several orders for this....cant wait....haven`t been this jazzed up over a product since Menzerna Power Lock
�
Bookmarks